Hebei Xukang Meter Manufacturing Co., Ltd.  

Product Name: Radar (strong dust) Level Sensor Transducer Radar Type Level Meter Level Transmitter Model NO.: UIRD603 Process Temperature: -40~250? Material: SS304 Certification: CE Warranty: 3 Year Structure: All in One Kind: Radar Accuracy: 0.1% Measurement Accuracy: +/-3mm, 5mm, 10mm, 15mm Range: >0-30m Principle: Electromagnetic Radiation Pressure: 4MPa Indicating: Yes LCD Signal: 4~20mA, Hart, RS485, Switch Modbus Seal: IP68 / IP67 Explosion-Proof: Exibiic T6 GB Process Connection: Screw, Flange Frequency: 26GHz Application: Solid Material, Strong Dust, Easy Crystallizing, E Dust-Proof Port: Selectable Special Requirements: Acceptable on Order Trademark: U-ideal Transport Package: Wooden Case or Carton Specification: CE Origin: Tianjin, China HS Code: 9026100000 Product Description Hebei Xukang Meter make and supply Strong dust-proof radar level gauge for cement/solid/water level measuring, high frequency non-contact radar level transmitter.made in China with lower cost than other supplier. Manufactured with CE standardlevel gaugeApplication:solid material, strong dust, crystallizing, dew environmentMeasure range70mProcess connection:Screw, FlangeMedium Temperature-40~250ºCProcess pressure:-0.1~4.0MPaAccuracy:±15mmFrequency:26GHzExplosion-proof class:ExibIIC T6 GbProtection class:IP67signal output:4...20mA/HART(2-wire / 4-wire) RS485/ModbusUIRD603 radar level gaugeExplosion-proofP standard (Non-Explosion-proof)I intrinsically safety(Exib IIC T6 Gb)D intrinsically safety+ Explosion-proof (Exd [ib] ib IIC T6 Gb)Process Connection/MaterialG Thread G1½ A/ Stainless Steel 304N Thread 1½ NPT/ Stainless Steel 304B Flange DN80/ Stainless Steel 304C Flange DN100/ Stainless Steel 304D Flange DN125/ Stainless Steel 304E Flange DN150/ Stainless Steel 304F Flange DN200/ Stainless Steel 304H Flange DN250/ Stainless Steel 304M Flange DN80/ Universal(chrome-plated carbon steel )K Flange DN100/ Universal(chrome-plated carbon steel )T Flange DN125/ Universal(chrome-plated carbon steel )Z Flange DN150/ Universal(chrome-plated carbon steel )W Flange DN200/ Universal(chrome-plated carbon steel )V Flange DN250/ Universal(chrome-plated carbon steel )Y Special Orderradarlevel gaugeAntenna type /MaterialB Horn Antenna Φ 76mm/ Stainless Steel 304C Horn Antenna Φ 96mm/ Stainless Steel 304D Horn Antenna Φ 121mm/ Stainless Steel 304Seal/ process temperatureV Viton/(-40~150) ºCK Kalrez/(-40~250) ºCElectronic Unit2 (4~20)mA/24V DC 2-wire system3 (4~20)mA/24V DC/HART 2-wire system4 (4~20)mA/220V AC/ 4-wire system5 RS485/ModbusHousing / Protection ClassL Aluminum /IP67G Stainless Steel 304/IP67Cable EntryM M20 x l. 5N ½ NPTLCD display / programingA YesX NoGeneral introductionRD60X series radar level gauge is a 26G high frequency radar level transmitter apply to solid particles or powder, strong dust situation. The max measure range up to 70meter. The new designed antenna have much high speed processor and smaller size, easy to install and non-contact radar, no wear, no pollution. Almost no corrosion, bubble effect and not affected by water vapor in the atmosphere, the temperature and pressure changes.radar level gauge Working principleRadar level transmitter antenna microwave pulse is narrow, the downward transmission antenna. Microwave exposure to the medium surface is reflected back again by the antenna system receives, sends the signal to the electronic circuit automatically converted into level signals (because the microwave propagation speed, electromagnetic wave to reach the target and the reflected back to the receiver this time is almost instantaneous).The level is counted on the basis of the flange sealing surface or screw bottom surface.Notice: The materials to be measured can't be in the blind area D.CharacteristicsBecause this series radar level gauge have high frequency 26GHz, it have following features:1. Small antenna size, easy to install; Non-contact radar, no wear, no pollution.2. Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.3. Strong dust in the operation environment has little effect to the electromagnetic wave.4. A shorter wavelength, the reflection of solid surface inclination is better.5. Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.6. The measuring range is smaller, for a measurement will yield good results.7. High signal-to-noise ratio, the level fluctuation state can obtain better performance.8. High frequency, measurement of solid and low dielectric constant of the best choice.Our other related products: Level gauges, flow meters, pressure transmitters, indicators, industrial system.Welcome to contact if have enquiry.--------------------------------------------------------------------------------Thanks and Best wishes,Jenny ZhaoGeneral ManagerTianjin U-ideal Instrument Co., LtdTel: +86 22 88971536 Mobile: +86 13072030856Eco-friendly solutions for all industriesOur products and solutions have been exported to many countries and areas all over the world, and are widely used to monitor the concentration of combustible, toxic, dangerous and special gases. Our products can be used in the oil, chemical, metallurgy, mining, electronics, electric power, pharmaceutical, food and medical industries, as well as in agriculture. They've also been applied to urban gas planning projects, for home safety and health, public areas, road safety management, sewage disposal and biomedical science. Our gas detectors are widely used to protect the environment and to improve the living conditions of people.Most of our products have ATEX, EN, UL, CE, TV, RoHS and other approvals. Every year, we attend OTC, IFSEC, Essen, Intersec, the Hong Kong Electronics Fair and the Canton Fair. Come visit us at these events.