Hebei Xukang Meter Manufacturing Co., Ltd.  

Product Name: CS41h CS11h Vertical/Horizontal Free Ball Float Steam Trap Type: Ball Float Trademark: U-ideal Transport Package: Wooden Case or Carton Specification: SGS Origin: Tianjin, China HS Code: 90261000 Product Description CS41H/CS11H Free Float / Auto Horizontal free float steam trap valveVertical free float steam trapfree ball float steam trap Pressure Rating:1.6- 4.0Mpa Size:DN15- 200 Material:WCB.F304. F316.etcFree ball float steam trap with built-in X-element type automatic air vent, for use on process equipment.Discharge 600-700kg per hour Free ball float steam traps are used in oil and gas, pipeline, petrochemical, paper, utility, food, industries. Ideal for steam main, steam heating system and condensate recovery system.Free ball float steam traps prevent the steam put effectively discharge sweat quickly. Especially suit for technical process that requires fast heating speed, controls heating temperature strictly, no pile-up sweat in heater assembly.Working Principle1. Start up, the valve air vent opens wide to continuously discharge initial air.2. As condensate comes into the traps, the float rises to allow condensate to be discharged from valve seat.3. Hot condensate( up to steam temperature) comes into the trap heated Bimetal_element to close valve air vent, before steam reaches the trap but condensate coming into the trap continues to be discharge through valves seat4. When condensate flow to the trap stops, the float closes valve port( valve seat)which is, in addition always sealed below the water level., prevent any steam leakage.Features1. No concentrated wearing, long duration;2. Good property of sealing, low steam leakage, notable energy-saving effect3. Set with adevice of air exhaust, able to quickly start and continuously drain condensated water;4. High rate of backing presssure, low degree of undercooling, helpful to utilize the condensated waer by recovering;5. No noise, easy to repair, good interchangeability.Shell Test1.5 times the design pressurevalve BodyWCB/HT/QTAction testAtmospheric pressure0.4~0.6MPaValve CoverWCB/HT/QTPressure0.4~0.6 MPaFloatAustenitic stainless steelMaximum working temperature350ºCValve SeatAustenitic stainless steelWorking pressure range0.01~4.0 MPaFilterAustenitic stainless steelMaximum allowable temperature280ºC~540ºCDiaphragmSpecial SteelMinimum supercooling temperature≈0ºCPressure relief valveA105 + stainless steelThe maximum back pressure rate90%GasketPPL/H62Leak rate of the Load≈0Bolt35CrMoAWorking mediumSteam CondensateScrew nut45